Miracle Shield

You may have seen other products that claim to protect surfaces from weather and the elements. But Miracle Shield is the best product of it's type that we have ever seen. We have found it very effective in any of the following purposes:

• Protect your lawn furniture from rusting
• Get more life from your roof
• Protect your exterior walls from graffiti
• Protect your tires from getting dull looking, they'll stay bright like new

Surfaces
Miracle Shield can be used on the following surfaces.
Vinyl,  Plastic, Rubber, Metal, Interior Wood, Roofs, Concrete, Asphalt, Stone Work, Brick Work

Finish
Miracle Shield, will dry to a satin or low-luster semi-gloss finish. Which is scratch resistant. There is no buffing required.

Application 
Miracle Shield can be applied as follows:
Brush it on, Spray it on, Roll it on with a short nap roller. Wipe it on. Sponge it on.

Miracle Shield hardens best at a surface temperature of 55 degrees or higher on an average of 15 - 20 minutes.

Surface Preparation
In order for Miracle Shield to work properly, the surface must be free from any dust, dirt grease, grime or wax. You can remove any oil, wax or grease with household rubbing alcohol. 

Cleaning Properties 
Miracle Shield has no known cleaning properties such as some other multi-purpose sealants. However, some applications have shown that mild mars, rust and stains have been removed when applied. 

Viscosity 
The thickness of Miracle Shield is determined by it’s application. The standard application id either by brush, spraying or rolling. With standard applications, about 2 mil. of product is realized per coat. 

Product Indications / Preparation 
Miracle Shield comes already mixed and ready for use right out of the container. There is no mixing or dilution necessary. No mixing No diluting No concentrates to bother with Water Soluble Ready to use Cleans with soap and water when wet Cleans with alcohol when dry. 

Restrictions 
Miracle Shield is not to be used on glass, mirrors, chrome or brass. 

Hazards 
Miracle Shield is a mixture of 55% water and 45% chemical solvent.
Combustible fumes are emitted in it’s wet state.
Perfectly safe in it’s dry state
When applying, ventilate area of application well
Keep container closed when not in use. 

Protects Against
Mildew / Moisture / Water Graffiti Grease / Grime / Oil Wear on non-cloth surfaces 

Guarantee 
Miracle Shield is guaranteed not to chip, crack, peel or yellow. 

NOTE: Outdoor applications should be a minimum of two coats solution.

There are hundreds of other uses for this amazing product.